| Product Name | Yale Panic Bar for Emergency Exit - ASSA |
|---|---|
| Weight | 1.000000 |
| COUNTRY OF MANUFACTURE | India |
| Brand | ASSA |
| HSN Code | 830241 |
| System Type | CONVENTIONAL |
| Model | ASSA-ACS-YPE RM501P |
| Freight | To pay by Customer, extra at actuals. Godown Delivery |
| Category | Fire Safety, Access Control System, Biometric, Door, Door Panic Bar |
| Product Code | CPK-0157 |
In Stock ( 100 Units )
The perfect combination of safety and security, Yale Salva panic exit
devices are UL certified with up to 3 hrs fire rating. Ensuring safe,
unhindered passage in an emergency situation, Salva PED are
easy to install and available in two color and material options
to match your requirements.
| Salva-R Series Single Point Panic Exit Device |
|
| Latch Bolt | 3/4” throw, deadlocking design |
| Strike | For 5/8” stop |
| Projection | Pushbar Neutral: 2-3/16”(55mm), Pushbar Depressed: 1-7/8”(47mm) |
| Reversible | Non-handed, reversible for all functions and trims |
| For Door | 1-3/4” thick of wood or metal door |
| Door Width | 3” standard for door width of 2”-6” to 3” 4” standard for door width of 3” to 4” |
| Stile | 4-1/4” minimum |
| Mounting Height | 40-5/16” from CL to finished floor recommended |
| Mounting Fasteners | Furnished standard with sheet metal & machine screws or SNB as option |
| Cylinder | For trim, knob, lever & thumb-piece type |
| Dogging | 1/4 turn, hex key dogging on non-fire labeled device |
| UL Listed | For “Panic Hardware” and “UL”. Labeled (3 hours) fire exit hardware |
| Operation | Inside by slight pressure on any point of the push bar all time |
| Salva-V Series Double Point Panic Exit Device |
|
| Latch Bolt | 3/4” throw, stainless steel |
| Dead Latch Bolt | 5/8”, steel |
| Strike | For 5/8” stop. Plus shim for 1/2” stop |
| Projection | 2-1/2” maximum, 1-7/8” pressed |
| Reversible | Non-handed, reversible for all functions and trims |
| For Door | 1-3/4” thick of wood or metal door. Specify thickness if other than 1-3/4” |
| Backset | 2-3/4” standard |
| Door Width | 3” standard for door width of 2”-6” to 3”-0” 4” standard for door width of 3”-0” to 4”-0” |
| Stile | 4-1/4” minimum |
| Top & Bottom Rod Length for 7” door | Top rod 45-1/4”, bottom rod 34” |
| Mounting Height | 40-5/16” from CL to finished floor recommended |
| Mounting | Furnished standard with sheet metal & machine screws or SNB as option |
| Cylinder | For trim, knob, lever & thumb-piece type “Schlage C” key way |
| Dogging | 1/4 turn, hex key dogging on non-fire labeled device |
| UL Listed | For “Panic Hardware” and “UL”. Labeled (1.5 hours) fire exit hardware |
| Operation | Inside by slight pressure on any point of the push bar all time |
| Returns Policy: |
| 1. | Once orders are placed, cancellations are not permitted. |
| 2. | Payments for orders will not be adjusted or refunded in case of cancellation. |
| Shipping Policy: |
| 1. | Material will be shipped exclusively on a To-Pay basis for Godown Delivery only. |
| 2. | Shipping freight costs will be additional and based on actuals, to be borne by the buyer. |
| 3. | Additional shipping services such as courier or door delivery will incur extra charges, to be borne by buyer on extra at actuals basis |
Write Your Own Review
