• Provides a zone of up to 25 conventional smoke detectors (depending on detector type)
• Supervises auxiliary power supply for conventional detectors
• Compatible with Class B (Style B) or Class A (Style D)
• Module address programming with the D5070 Analog Device Programmer between 1 and 127
• Bi‐colored LED provides module status

The FLM‐325‐CZM4 Conventional Zone Module enables the FPA‐1000 Analog Addressable Fire Panels
to interface and monitor up to 25 conventional devices depending on the device type such as two-wire smoke detectors or pull stations.

The module requires an auxiliary input voltage to provide power for the detector zone. It supervises the
power supply as well as the entire zone of devices. Status conditions are reported as normal, open or
short.

The module offers fixed threshold levels for open and short that can not be changed. It fits into a standard 4‐inch square or double‐gang electrical back box.

Functions

Address programming
Each module is addressed through the D5070 Analog Device Programmer and transmits the status of one zone of devices back to the panel.
Status display
The module has a bi‐colored LED that flashes every time the module is polled and can be switched on
steady when the module goes into active condition.

Certifications and approvals

Installation/configuration notes

Compatible Products
The following products are compatible with the FLM‐325‐CZM4 Conventional Zone Module:

1
Requires D253 Two‐wire Detector Base (24 VDC)
2
Requires D280A Two‐wire Detector Base (24 VDC)

Parts included

Technical specifications