Card Cage-2 Slots
Model CC-2 - Siemens

Product Overview
The Model CC-2 card cage provides the physical mounting location and all wiring
connection points for all fire and voice system options cards for the Cerberus PRO
Modular system.
Specifications
All cards plugged into the Model CC-2 card cage communicate with other Cerberus
PRO Modular system modules via a common 60-pin data bus. This 60-pin bus runs
through the card cage, making all communication data buses and signals available
to all cards.
Connectors are provided on the left & right side of the Model CC-2 to connect a 60-
pin cable for communications with the Cerberus PRO Modular system’s operator
interface, power supplies and amplifiers modules. There are no active components
on Model CC-2.
Field wiring to all devices and circuits terminates on the Model CC-2 card cage. All
cards designed for use with the Model CC-2 route their field wiring terminations to
the `top’ of Model CC-2 – these connections are all power-limited.
Internal wiring connections distribute 24VDC to cards or high-level audio signals
(depending on application used) connect to the `bottom’ of Model CC-2 – these
connections are all non-power limited.
All wiring connections to Model CC-2 are to removable terminal blocks. Terminal
blocks are rated for use with wire-sized 12AWG to 24AWG. Each terminal block
comes with a protective cover that also serves as a handle to allow easy terminalblock removal when wires are connected.
Each connector is numbered to make wiring terminations to the correct position on
the terminal block simple and reduce the potential for wiring errors.