170 Watt power supply | FP2011-U1 | Siemens

 170W (Model FP2011-U1) and 300W (Model FP2012-U1) output power to fire- only and intelligent voice communication (IVC) systems

     Model FP2011-U1 used with various Siemens fire-alarm control panels (FACPs)

     Up to 252 | 504-point addressable FACPs or IVC panels can obtain primary, regulated power from
        300W power supplies, Model FP2012-U1

 Operates with 120VAC or 240VAC

 Monitors AC-power failure and ‘brownout’ conditions

 Short-circuit or over-current protection

 UL-recognized component

 UL 864 10th Edition / UL 1481 and ULC-S527 Listed

 FM, CSFM and NYC Fire Department Approved

The 170-Watt power supply (Model FP2011-U1) and 300-Watt power supply (Model FP2012-U1) provide primary, regulated (24VDC, nominal) power for normal operation to Siemens ─ Fire Safety systems. Both power supplies are filtered and regulated.

Model FP2011-U1 is rated 24VDC, nominal, at 6.5 Amps, and Model FP2012-U1 is
rated 24VDC, nominal, at 11.5 Amps.

Notes: Model FP2011-U1 is used with Models FC2005, FC2025 and FC2050
          FACPs. Model FP2012-U1 operates with Models FC2025 and FC2050 FACPs, as well as with                Models FV2025 and FV2050 IVC panels.

The 170-Watt power supply incorporates a 4.0A, non-resettable slow-blow fuse on the primary input, and includes a built-in AC-line filter for surge and noise suppression. Model FP2011-U1 mounts in a standard Desigo-brand enclosure, and there are no serviceable parts to be maintained.

The 300-Watt power supply incorporates two (2) 6.3A replaceable, non-resettable slow-blow fuses on the primary input and includes a built-in AC line filter for surge and noise suppression. Model FP2012-U1mounts in a Desigo enclosure, and there are no serviceable parts to be maintained.

Both power supplies are FM (#3010); FDNY (#6104) and CSFM (#7165-0067:0259) Approved.