12V 3A Switching mode power supply | SSM1203 | SANSTAR

₹552.00 ₹651.36
In stock
More Information
Product Name12V 3A Switching mode power supply | SSM1203 | SANSTAR
Weight1.000000
COUNTRY OF MANUFACTUREIndia
BrandSanstar
HSN Code85044090
System TypeCONVENTIONAL
ModelSSM1203
Freight To pay by Customer, extra at actuals. Godown Delivery
CategoryAlarm System, Fire Safety, Power Supply
Product CodeCPK-0118
Freight Extra (Godown Delivery)
In Stock ( 100 Units )

FEATURES

•  Latest state-of-the-art current mode PWM controller and MOSFET         based design.
•  Soft start circuit to limit the AC inrush current.
•  Reliable even at high ambient temperature.
• 100% Full load burn-in test
•  LED indication for DC OK.

SPECIFICATIONS

Input Characteristics Input voltage 150-300VAC
Frequency 45-60Hz
Inrush current <38A
AC current consumption 1A
Input protection 1A Subminiature fuse (Time-Lag type)
Transient surge protection Yes (varistor)
Filter EMI/RFI
Buffer time >20msec at full load
Efficiency >80%
Output
Characteristics
Nominal voltage 12VDC
Voltage adj. range 12-15VDC
Nominal current 3A
Maximum output power 45W
Line regulation < +/- 0.5%
Load regulation < +/- 0.5%
Ripple and noise < +/- 1% P-P
Indication DC OK- Green LED
Connection in parallel Yes, with diode ORing
Over load protection Yes
Short circuit protection Yes (short-term)
Environmental
Characteristics
Ambient temperature protection 0°C - 60°C
Ambient temperature (storage) 0°C - 75°C
Relative humidity 95% at 25 °C, non condensation
Cooling Natural air condensation
Safety
Characteristics
Safety standard IS 13252 (Part-1), IEC 60950-1
Insulation voltage I/P-O/P 3.0KVAC
Insulation voltage I/P-PE 1.5KVAC
Insulation voltage O/P-PE 500VAC
Isolation resistance I/P-O/P >100mega ohm @500DC min.
Isolation resistance I/P-PE >100mega ohm @500DC min.
Isolation resistance O/P-PE >100mega ohm @500DC min.
General
Characteristics
Installation position Panel mounting
Type of connection

Screw type connection (0.2 sq.mm-2.5 sq.mm)

Weight 0.3 Kg
Dimension (LXWXH) 83 X 73 X 48 mm

NOTE :

1) All these parameters are specified at 230VAC@50Hz input voltage      and ambient temperature +25°C.
2) For continuous improvement, specifications are subject to change      without prior intimation.

 

Returns Policy:
1. Once orders are placed, cancellations are not permitted.
2.  Payments for orders will not be adjusted or refunded in case of cancellation.
Shipping Policy:
1. Material will be shipped exclusively on a To-Pay basis for Godown Delivery only.
2.  Shipping freight costs will be additional and based on actuals, to be borne by the buyer.
3. Additional shipping services such as courier or door delivery will incur extra charges, to be borne by buyer on extra at actuals basis
Write Your Own Review
You're reviewing:12V 3A Switching mode power supply | SSM1203 | SANSTAR
Your Rating
WA button WA button