12V 1A Switching mode power supply | SSM1201 | SANSTAR
₹300.00 ₹354.00
Out of stock
Product Name | 12V 1A Switching mode power supply | SSM1201 | SANSTAR |
---|---|
Weight | 1.000000 |
COUNTRY OF MANUFACTURE | India |
Brand | Sanstar |
HSN Code | 85044090 |
System Type | CONVENTIONAL |
Model | Sanstar-SSM-1201 |
Freight | To pay by Customer, extra at actuals. Godown Delivery |
Category | Alarm System, Fire Safety, Power Supply |
Product Code | CPK-0117 |
Out Of Stock
Features:
• Top switch based offline switcher.
• Maximum output power of 12W.
• High efficiency, High reliability, Low cost.
• AC input 180V ~ 265VAC.
• Built-in EMI filter.
• Low Ripple and Noise.
• Soft start circuit to limit the AC inrush current.
• Screw type input and output connectors.
• Compact, Light weight.
• Momentary output short circuit protection, Over voltage protection.
• 100% Full load burn-in test.
Specifications:
∗ Input Characteristics
Input Voltage | 180V – 265 VAC. |
Input Frequency | 45 – 60 Hz. |
Input Connector | 3-pin screw type connector. |
Filters | EMI/RFI. |
∗ Output Characteristics
Output Voltage | 12 VDC. |
Output Current | 1 A. |
Max. Output Power | 12 W. |
Output Connector | 2-pin screw type connector. |
Output Indication | Output Ok – Green colour LED. |
Output Protection | Over Voltage Protection. |
Line Regulation | < +/- 0.5%. |
Load Regulation | < +/- 0.5%. |
Ripple and Noise | < +/- 1% P-P. |
∗ Environmental Characteristics
Operating Temperature | 55 °C at Full Load and 70°C at 60% load. |
Maximum Temperature Rise
|
50°C. |
Cooling | By free air convection. |
Relative Humidity | 95% NC. |
∗ General Characteristics
Efficiency | 70%. |
Hold Time | > 20mSec on full load. |
Dimension (L X W X H) mm | 75X45X30. |
Mounting | Panel Mounting/Table Top. |
Note:
1) All these parameters are specified at 230V AC input.
2) For continuous improvement, specifications are subject to change without prior intimation.
Returns Policy: |
1. | Once orders are placed, cancellations are not permitted. |
2. | Payments for orders will not be adjusted or refunded in case of cancellation. |
Shipping & Delivery Policy: |
1. | 100 INR will be charged as shipping fee if buyer and seller are from same city. If Buyer and Seller are from different cities, the shipping charges will be on "To Pay Basis" or at actuals. |
2. | Shipping freight costs will be additional and based on actuals, to be borne by the buyer. |
3. | Additional shipping services such as courier or door delivery will incur extra charges, to be borne by buyer on extra at actuals basis |
4. | Material will be shipped exclusively on a To-Pay basis for Godown Delivery only. |
Write Your Own Review