12V 10A Switching mode power supply | SSM12BIS | SANSTAR

₹1,518.00 ₹1,791.24
Out of stock
More Information
Product Name12V 10A Switching mode power supply | SSM12BIS | SANSTAR
Weight1.000000
COUNTRY OF MANUFACTUREIndia
BrandSanstar
HSN Code85044090
System TypeCONVENTIONAL
ModelSSM12BIS-10AMPS
Freight To pay by Customer, extra at actuals. Godown Delivery
CategoryAlarm System, Fire Safety, Power Supply
Product CodeCPK-0120
Freight Extra (Godown Delivery)
Out Of Stock

FEATURES

•  Latest state-of- the-art current mode PWM controller and MOSFET       based design.
• Soft start circuit to limit the AC inrush current.
•  Reliable even at high ambient temperature.
• 100% Full load burn-in test.
•  LED indication for DC OK.
•  BIS Approved.

SPECIFICATIONS

specifications

Input
Characteristics
Input voltage 150-265VAC*
Frequency 45-60Hz
Inrush current <38A
AC current consumption 4A
Input protection 4A Subminiature fuse (Time-Lag type)
Transient surge protection Yes (varistor)
Filter EMI/RFI
Buffer time >20msec at full load
Efficiency >80%
Output
Characteristics
Nominal voltage 12VDC
Voltage adj. range 12-15VDC
Nominal current 10A
Maximum output power 150W
Line regulation < +/- 0.5%
Load regulation < +/- 0.5%
Ripple and noise < +/- 1% P-P
Indications DC OK- Green LED
Connection in parallel Yes, with diode ORing
Over voltage protection Yes, normally works within 16-19VDC

Over load protection

Yes, normally works within 102-150% of rated nominal current

Short circuit protection Yes
Environmental
Characteristics
Ambient temperature (operation) 0°C - 60°C
Ambient temperature (storage) 0°C - 75°C
Relative humidity 95% at 25 °C, no condensation
Cooling Natural air convectoon
Safety
Characteristics
Safety standard IS 13252 (Part-1), IEC 60950-1
Insulation voltage I/P-O/P 3.0KVAC
Insulation voltage I/P-PE 1.5KVAC
Insulation voltage O/P-PE 500VAC
Isolation resistance I/P-O/P >100mega ohm @500DC min.
Isolation resistance I/P-PE >100mega ohm @500DC min.
Isolation resistance Isola
on resistance O/P-PE
>100mega ohm @500DC min.
General
Characteristics
Installation position Panel mounting 
Type of connection Screw type connection (0.2 sq.mm-2.5 sq.mm)
Weight 0.8 Kg
Dimension (LXWXH) 173 X 60 X 91 mm

NOTE :

1) The license number assigned for BIS approval is R-71014273.

2) Highest input operating voltage is 300VAC.

3) All these parameters are specified at 230VAC@50Hz input voltage and ambient temperature (+25°C).

4) For continuous improvement, specification subject to change without prior intimaon.

Returns Policy:
1. Once orders are placed, cancellations are not permitted.
2.  Payments for orders will not be adjusted or refunded in case of cancellation.
Shipping & Delivery Policy:
1. 100 INR will be charged as shipping fee if buyer and seller are from same city. If Buyer and Seller are from different cities, the shipping charges will be on "To Pay Basis" or at actuals.
2.  Shipping freight costs will be additional and based on actuals, to be borne by the buyer.
3. Additional shipping services such as courier or door delivery will incur extra charges, to be borne by buyer on extra at actuals basis
4. Material will be shipped exclusively on a To-Pay basis for Godown Delivery only.
Write Your Own Review
You're reviewing:12V 10A Switching mode power supply | SSM12BIS | SANSTAR
Your Rating
WA button WA button