12V 05AMPS Doide ORing Module Redundant Power Supply | Sanstar
| Product Name | 12V 05AMPS Doide ORing Module Redundant Power Supply | Sanstar |
|---|---|
| Weight | 1.000000 |
| COUNTRY OF MANUFACTURE | India |
| Brand | Sanstar |
| HSN Code | 85044090 |
| System Type | CONVENTIONAL |
| Model | ssmdor-1205 |
| Freight | To pay by Customer, extra at actuals. Godown Delivery |
| Category | Alarm System, Fire Safety, Power Supply |
| Product Code | CPK-0115 |
FEATURES
• DIN Rail mountable redundancy module with schottky diode.
• Potential free “NO” contact for each input.
• LED indication for each input and output.
• IP 20 protection and metal housing.
• 100% full load burn in test
SPECIFICATIONS
| Input Characteristics |
Nominal voltage | 12VDC |
| Input voltage range | 12-15VDC | |
| No of inputs | 2 | |
| Maximum input current | 2X5A | |
|
No load current consumption |
<=0.05A (Type tested) | |
| Input indication | Green LED | |
| Output Characteristics |
Output current | 1X5A |
|
Heat dissipation at nominal load |
8.5W | |
| Output indication | Green LED | |
| Input power supply status | Potential free ‘NO’ contact (28VDC/300VAC-5A) | |
| Voltage drop across diode | 0.6V max at full load | |
| Environmental Characteristics |
Ambient temperature (operation) | 0°C +70°C |
| Ambient temperature (storage) | 0°C +80°C | |
| Relative humidity | 95% at 25 °C, no condensation | |
| Cooling | Natural air convection | |
| General Characteristics |
Di-Electric strength | 1KVAC (Between input/output to body) |
| Insulation resistance | 100mega Ohm @500VDC min. (Between input/output to body) |
|
| Installation position | DIN Rail vertical mounting (DIN Rail TS-35/7.5 or 15) | |
| Type of connection |
Screw type connection (Make: Phoenix contact) |
|
| Conductor cross section | 0.2 sq.mm-2.5 sq.mm for relay contact 0.2 sq.mm-4.0 sq.mm for input and output |
|
| Weight | 0.45 Kg | |
| Dimension (WXHXD) | 46 X 81 X 81.5 mm |
NOMENCLATURE & MOUNTING
| No. | Description of function elements |
| 1 | Connection of input voltage: -IN1+ /-IN2+. |
| 2 | Relay contact: Max. 28VDC/300VAC-5A. |
| 3 | Connection of output voltage: DC -OUT+. |
| 4 | Indication: IN1 OK LED. |
| 5 | Indication: IN2 OK LED. |
| 6 | Indication: OUTPUT OK LED. |
SAFETY NOTES & WARNING INSTRUCTIONS
• Installation and start-up must only be carried out by qualified personnel.
• All incoming supply lines and output cables must have sufficient fuse protection.
• Minimum 5 cm space should be provided between other modules for sufficient convection.
• For connecting the redundancy module to the power supply, we recommend using two cables of the same length and with identical cross sections.
NOTE
1) All these parameters are specified at 12VDC @5A.
2) For continuous improvement, specifications are subject to change without prior intimation.
| Returns Policy: |
| 1. | Once orders are placed, cancellations are not permitted. |
| 2. | Payments for orders will not be adjusted or refunded in case of cancellation. |
| Shipping Policy: |
| 1. | Material will be shipped exclusively on a To-Pay basis for Godown Delivery only. |
| 2. | Shipping freight costs will be additional and based on actuals, to be borne by the buyer. |
| 3. | Additional shipping services such as courier or door delivery will incur extra charges, to be borne by buyer on extra at actuals basis |
