RPS120-48 Selec 120W, 48V/2.5A DIN rail mounted Power Supply in Plastic Housing

₹1,131.28 ₹1,334.91
In stock
More Information
Product NameRPS120-48 Selec 120W, 48V/2.5A DIN rail mounted Power Supply in Plastic Housing
Weight1.000000
BrandSelec
Test CertificateNo
COUNTRY OF MANUFACTUREIndia
ModelRPS120-48
HSN Code85044090
Shipping time (business days)3
Freight To pay by Customer, extra at actuals. Godown Delivery
CategoryIndustrial Automation, Industrial Power Supplies
Product CodeRPS120-48
Freight Extra (Godown Delivery)
In Stock ( 500 Units )

RPS120-48 Selec 120W, 48V/2.5A DIN rail mounted Power Supply in Plastic Housing

 

 

Features :

  • Supports 90 - 264 VAC / 127 - 370 VDC
  • l Efficiencies up to 89 %
  • Protection against short circuit, overload, overvoltage & over temperature
  • Cooling by free air convection
  • UL 508 approved (E522848)

 

SPECIFICATIONS:

MODEL   RPS120-48-CU
OUTPUT NOMINAL DC VOLTAGE 48 V
RATED CURRENT 2.5 A
CURRENT RANGE 0 - 2.5 A
RATED POWER 120 W
RIPPLE & NOISE (max) <1% of Vout
VOLTAGE ADJ. RANGE 48 to 56 V
VOLTAGE TOLERANCE ± 1 %
LINE REGULATION ± 1 %
LOAD REGULATION ± 1 %
TURN ON TIME < 1 sec @ 230 VAC & < 3 sec @ 115 VAC, Full load
HOLD UP TIME ≥ 60 ms at 230 VAC & ≥ 15 ms at 115 VAC, Full load
RISE TIME < 100 ms
INPUT VOLTAGE RANGE * 90 - 264 VAC / 127 - 370 VDC
FREQUENCY RANGE 50 / 60 Hz
EFFICIENCY @ 230V AC Up to 89 %
AC CURRENT 2.2 A @ 115 VAC; 1.5 A @ 230 VAC
INRUSH CURRENT < 48 Amps; Measured at 264 VAC, 25°C Ambient, Cold start
LEAKAGE CURRENT < 1 mA; 264 VAC input
PROTECTION OVERLOAD > 110 % of rated output current; Hiccup type; Autorecovery
OVERVOLTAGE

61V DC ±2V DC

Latched type; Input AC power to be recycled to recover the power supply

OUTPUT SHORT CIRCUIT Hiccup mode when output is shorted; Autorecovery type
OVER TEMPERATURE Power supply shuts down when the temperature of PCB below main transformer reaches typically 120°C;
Turns on only after the temperature falls below 90°C typically and AC power is recycled thereafter
ENVIRONMENT OPERATING TEMP 25°C to + 70°C; De-rate linearly above 50°C from 100 % load at 50°C to 50 % load at 70°C,
- 25°C to 0°C startup is guaranteed with spec deviation (Output ripple can be more than 10 % of the output voltage.)
STORAGE TEMP 40°C to + 85°C
COOLING Natural convection cooled
HUMIDITY 5 to 95 % RH, Non condensing
ALTITUDE 2000 m
VIBRATION Component : 10 ~ 500 Hz, 2 G 10 min. / 1 cycle, period for 60 min. each along X, Y, Z axes
SAFETY & EMC DIELECTRIC WITHSTAND
VOLTAGE
I/P to Earth: 2500 VAC
I/P to O/P: 4000 VAC
O/P to Earth: 1500 VAC
OTHERS DIMENSION 43 x 109.8 x 102.7mm (W x H x D)
WEIGHT 350 gms
MOUNTING 35 mm DIN rail
Returns Policy:
1. Once orders are placed, cancellations are not permitted.
2.  Payments for orders will not be adjusted or refunded in case of cancellation.
Shipping & Delivery Policy:
1. 100 INR will be charged as shipping fee if buyer and seller are from same city. If Buyer and Seller are from different cities, the shipping charges will be on "To Pay Basis" or at actuals.
2.  Shipping freight costs will be additional and based on actuals, to be borne by the buyer.
3. Additional shipping services such as courier or door delivery will incur extra charges, to be borne by buyer on extra at actuals basis
4. Material will be shipped exclusively on a To-Pay basis for Godown Delivery only.
Write Your Own Review
You're reviewing:RPS120-48 Selec 120W, 48V/2.5A DIN rail mounted Power Supply in Plastic Housing
Your Rating
WA button WA button