Butterfly Valve (Wafer Type) PN 1.6 With S.G Iron Disc Gear Operated 1078A - Zoloto-1.6-300mm
₹20,607.60 ₹24,316.97
In stock
| Product Name | Butterfly Valve (Wafer Type) PN 1.6 With S.G Iron Disc Gear Operated 1078A - Zoloto-1.6-300mm |
|---|---|
| Weight | 1.000000 |
| Brand | Zoloto |
| Valve Size | 300mm |
| Test Certificate | Yes |
| COUNTRY OF MANUFACTURE | India |
| Valve Type | Wafer Type |
| Valve Body | S.G Iron |
| IBR Approved | No |
| HSN Code | 84818030 |
| Warranty | 6 Months |
| Category | Butterfly Valve, Industrial Valves, Wafer Type |
| Product Code | JAI-0044-1.6-300mm |
In Stock ( 100 Units )
Salient Features
- Design Standard IS 13095 / BS EN 593 (BS 5155).
- Wafer Type.
- Gear Operated.
- S.G Iron construction.
- S.G Iron disc which is accurately guided between the two stems.
- Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
- Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
- Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.
*Valves with Neoprene / Viton / Silicon lining can also be provided at nominal extra cost.
PN 1.0 –
Test Pressure (Hydrostatic) :
Shell : 1.5 MPa
Seat : 1.1 MPa
Maximum Working Pressure : 1.0 MPa
Maximum Working Temperature : 90°C
PN1.6 –
Test Pressure (Hydrostatic) :
Shell : 2.4 MPa
Seat : 1.76 MPa
Maximum Working Pressure : 1.6 MPa
Maximum Working Temperature : 90°C
| P.No. | Name of Part | Material of Construction | Specification | Qty. |
| 1 | Gear Box Assembly | --- | --- | 1 |
| 2 | Gasket | Steam Jointing Sheet | IS2712 Gr. W/3 | 1 |
| 3 | Packing Bush | Bronze | IS 318 Gr. LTB 2 | 1 |
| 4 | Upper Stem | Stainless Steel | IS 6603 Gr. 12 Cr12 | 1 |
| 5 | Body | S.G Iron | IS 1865 Gr. 400/15 | 1 |
| 6 | Disc | S. G Iron (Epoxy Coated) | IS 1865 Gr. 400/15 | 1 |
| 7 | Taper Pin (Optional) | Stainless Steel | IS 6603 Gr. 12 Cr12 | 1 |
| 8 | Bush | Bronze | IS 318 Gr. LTB 2 | 1 |
| 9 | Lower Stem | Stainless Steel | IS 6603 Gr. 12 Cr12 | 1 |
| 10 | ‘O’ Ring | Nitrile Rubber | IS 5192 – 1 | 1 |
| 11 | L- Key Screw | Carbon Steel | --- | 1 |
| 12 | C – Sunk Screw & Nuts | Carbon Steel | --- | 4 Each |
| 13 | Handwheel | Sheet Metal | --- | 1 |
| 14 | Body Lining | EPDM / Nitrile | IS 5192 – 1 | 1 |
| 15 | Name Plate | Aluminium | --- | 1 |
| Returns Policy: |
| 1. | Once orders are placed, cancellations are not permitted. |
| 2. | Payments for orders will not be adjusted or refunded in case of cancellation. |
| Shipping & Delivery Policy: |
| 1. | 100 INR will be charged as shipping fee if buyer and seller are from same city. If Buyer and Seller are from different cities, the shipping charges will be on "To Pay Basis" or at actuals. |
| 2. | Shipping freight costs will be additional and based on actuals, to be borne by the buyer. |
| 3. | Additional shipping services such as courier or door delivery will incur extra charges, to be borne by buyer on extra at actuals basis |
| 4. | Material will be shipped exclusively on a To-Pay basis for Godown Delivery only. |
Write Your Own Review
