240W Mixer Amplifier with USB/Bluetooth - BOSCH
Product Name | 240W Mixer Amplifier with USB/Bluetooth - BOSCH |
---|---|
Weight | 1.000000 |
Brand | Bosch |
Test Certificate | No |
COUNTRY OF MANUFACTURE | India |
Model | PAS-PLE-1ME240-3 IN 85185000 |
HSN Code | 85185000 |
Warranty | 6 Months |
Freight | To pay by Customer, extra at actuals. Godown Delivery |
Category | Electronics, Audio Amplifier |
Product Code | CPK-0020 |
PLE-1MExxx-3IN Mixer amplifier,USB/BT
• Inbuilt Bluetooth for audio streaming
• Supports audio playback from USB pen drive
• 4 microphone/line inputs, plus music source input
• Optional 2‐tone chime generation for input 1
The Plena Economy mixer amplifiers are professional public address units with modern state‐of‐the‐art features.
They are easy to use, taking the complexity away from the user and putting it where it belongs, inside the equipment. Providing crisp and clear announcements and music is as easy as turning on a radio. Offering the essentials of public address in an affordable package.
System overview
The range consists of three mixer amplifiers, which are available in 60, 120, and 240 W. The mixer amplifiers are equipped with an inbuilt music source, which can provide hours of uninterrupted music either through Bluetooth streaming or USB pen drive. They are supplied with an IR remote control for controlling the music source. The units feature four mic/line inputs, 1 BGM and operate in a single zone. To ensure optimum performance, there are no moving parts, such as hard drives that can fail or wear out. The units have a limiter circuit and provide an audio insert feature to use as a pre/power amplifier. The VU meter gives an output level indication.
Functions
Power
The mixer amplifiers come in 60, 120 and 240 W output power. This power is directly available on 100 V constant voltage connections and on a low impedance connection for a 4-ohm load. Moreover, the amplifiers have a separate 100 V call-only output channel for addressing areas where only priority announcements are required. The call-only output can also be used for 3-wire remote volume control override.
Inputs
All mic/line inputs can be switched between microphone level and line level sensitivity. The inputs are balanced, but can be used as unbalanced inputs.
Phantom power can be switched-on to provide power to condenser microphones. Input channel 1 can take priority over all other
microphone, AUX & music inputs:
• Input 1 can be activated by contact closure on the
PTT (push to talk). A 2-tone chime can be configured
to precede an announcement.
Music source and AUX input
The unit has an internal music source and AUX input option. The internal music source plays audio files from an USB pen drive (with a capacity of up to 32GB)or streamed through Bluetooth. The player will automatically search and and play all playable audio tracks from the USB pen drive and has repeat /random/all modes. The following formats are supported: MP3 and
WAV files with bit rates from 32 kbit/s.
Personalized settings
Another useful feature is to indicate preferred settings on the front panel by inserting colored pins at the preset levels of all knobs. One user can make use of silver pins to set the controls as per his convenience. A second user can make use of red pins to set the controls for his particular use.
Output status
An LED VU meter provides output indication. A headphone socket (6.3 mm), below the VU meter, provides the mixer output. For total reliability and ease
of use, a limiter is integrated into the output stage to restrict output if the user applies excess signal.
Controls and indicators
Front panel
• Power-ON switch with LED indication
• LCD display, USB port, UBS/BT keyboard functions with IR remote sensor
• Four volume knobs for microphone inputs
• Volume knob for AUX input
• Knob for treble level
• Knob for bass level
• Master volume knob
• LED VU meter for master output (LEDs for -18, -12, -6,-3, 0 dB)
• Headphone socket
Back panel
• Four inputs with DIP swicthes
• AUX input
• Pair of RCA connectors for Insert feature
• 100 V and 4-ohm loudspeaker outputs
• A/c socket with fuse holder
Certifications and approvals
Safety | acc. to IEC 62368-1 |
Vibration and shock | acc. to IEC 60068 |
Transport | as per IS7028 |
EMC emission | acc. to CISPR 32 |
EMC immunity |
acc. to EN 55103-2: 2009 + A1: 2012 |
Technical specifications
Electrical | |
Mains power supply | |
Voltage PLE-1MExxx-3IN | 220-230 V, AC, 50 Hz / 60 W, 120 W, 240 W (reduced power at lower mains) |
Inrush current PLE-1ME060-3IN |
10 A |
Inrush current PLE‐1ME120‐3IN |
36 A |
Inrush current PLE‐1ME120‐3IN |
40 A |
Performance | |
Frequency response | 80 Hz to 18 kHz (+1/‐3 dB @ ‐10 dB ref. rated output) |
Distortion | <1% @ rated output power, 1 kHz |
Bass Control | Max. ± 8 dB |
Max. ± 8 dB | Max. ± 8 dB |
AUX input | |
Connector | Cinch, stereo converted to mono |
Sensitivity | 200 mV to 300 mV |
Impedance | 22 kohm |
S/N (flat at max. volume) | ≥70 dB |
Headroom | >25 dB |
Insert 1 x | |
Connector | RCA Cinch |
Sensitivity | 1 V |
Impedance | >10 kohm |
Loudspeaker output 100 V | |
Connector | Screw terminal, floating |
Max. / rated PLE-1ME060-3IN | 90 W / 60 W |
Max. / rated PLE-1ME120-3IN | 180 W / 120 W |
Max. / rated PLE-1ME240-3IN | 360 W / 240 W |
Loudspeaker output 4 ohm | |
Connector | Screw terminal, floating |
Max. / rated PLE-1ME060-3IN | 15.5 V (60 W) |
Max. / rated PLE-1ME120-3IN | 22 V (120 W) |
Max. / rated PLE-1ME240-3IN | 31 V (240 W) |
Mechanical | |
Dimensions (H x W x D) | 100 mm x 430 mm x 290 mm (19" wide, 2U high) |
Mounting | Stand-alone, 19" rack |
Color | Charcoal |
Weight | |
PLE-1ME060-3IN | Approx. 6.5 kg |
PLE-1ME120-3IN | Approx. 8.9 kg |
PLE-1ME240-3IN | Approx. 10.5 kg |
Environmental | |
Operating temperature | -5 oC to +45 oC |
Storage and transport temperature |
-40 oC to +70 oC |
Relative humidity | <95% |
Returns Policy: |
1. | Once orders are placed, cancellations are not permitted. |
2. | Payments for orders will not be adjusted or refunded in case of cancellation. |
Shipping & Delivery Policy: |
1. | 100 INR will be charged as shipping fee if buyer and seller are from same city. If Buyer and Seller are from different cities, the shipping charges will be on "To Pay Basis" or at actuals. |
2. | Shipping freight costs will be additional and based on actuals, to be borne by the buyer. |
3. | Additional shipping services such as courier or door delivery will incur extra charges, to be borne by buyer on extra at actuals basis |
4. | Material will be shipped exclusively on a To-Pay basis for Godown Delivery only. |