Push-in fitting NPQE-D-R12-Q6-P5
₹ 137.00
₹ 161.66+18% GST
Quantity
Min 1 • Stock 185
Product Specification
| Product Name | Push-in fitting NPQE-D-R12-Q6-P5 |
| Brand | Festo |
| Product Code | HYP-0163 |
| Country of Manufacturer | IN |
| Weight | 1.000 |
| Category | Push-in |
| Test Certificate | No |
| Model | NPQE-D-R12-Q6-P5 |
Product Description
Push-in fitting NPQE-D-R12-Q6-P5 - Strategic Industrial Guidance
Push-in fitting
Push-in fitting NPQE-D-R12-Q6-P5
Data sheet
| Feature | Value |
| Size | Standard |
| Nominal size | 4 mm |
| Type of seal on screwed plug | Coating |
| Mounting position | optional |
| Design | Straight design Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa...0.8 MPa -0.95 bar...8 bar -13.775 psi...116 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible |
| Corrosion resistance class CRC | 1 - Low corrosion stress |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 4 according to ISO 14644-1 |
| Ambient temperature | -5 °C...60 °C |
| Product weight | 46.67 g |
| Type of mounting | External hexagon, size 21 mm Internal hexagon, size 4 mm |
| Pneumatic connection, port 1 | Male thread R1/2 |
| Pneumatic connection, port 2 | For tubing outside diameter of 6 mm |
| Colour of release ring | Blue |
| Note on materials | RoHS-compliant |
| Material housing | Brass, nickel-plated |
| Material thread seal | PTFE |
| Material release ring | POM |
| Material tubing seal | NBR |
| Material tubing clamp component | Stainless steel |
Returns & Cancellation
Returns Policy:
1. Once orders are placed, cancellations are not permitted.
2. Payments for orders will not be adjusted or refunded in case of cancellation.
Shipping & Delivery Policy:
1. 100 INR will be charged as shipping fee if buyer and seller are from same city. If buyer and seller are from different cities, the shipping charges will be on "To Pay Basis" or at actuals.
2. Shipping freight costs will be additional and based on actuals, to be borne by the buyer.
3. Additional shipping services such as courier or door delivery will incur extra charges, to be borne by buyer on extra at actuals basis.
4. Material will be shipped exclusively on a To-Pay basis for Godown Delivery only.
Feedback
You're reviewing: Push-in fitting NPQE-D-R12-Q6-P5
Your Rating *
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.