DR. FIXIT Feviseal Hy 300

DR. FIXIT Feviseal Hy 300 Hybrid Sealant

DR. FIXIT Feviseal Hy 300 Grey Hybrid Sealant 600ml Pidilite

Description

Feviseal HY 300 gun grade is a one part moisture curing high modulus hybrid sealant. It has an excellent adhesion over a wide variety of substrates & is Paint-able with most common industrial paints. This sealant has been specifically formulated as a non staining sealant

 

Specification / standard compliance

ISO 11600 Type F25HM

ASTM C920 Type S, Grade NS, Class 25 T

Type FB, BS 5212-1:1990

Typical Applications

It is specially formulated for making permanent high strength elastic bonding between construction materials like,Bonding of metal (stainless steel, Aluminum, Steel, etc.), Rubber (Natural Rubber, Synthetic Rubber, Silicone Rubber, EPDM etc.), Natural Materials (Wood, Plywood, Leather, Paperboard etc.), Inorganic (Concrete, Mortar,  Natural Stone, Tile, Glass, Porcelain etc.) & Plastic ( Nylon, PVC, ABS,Polycarbonate etc.)

As an elastic adhesive for

• Cover plates, gaskets and coverings
• Acoustic ceiling tiles.
• Floor mouldings and door sills.
• Light weight construction materials
• Wood or metal and door frames.
• Roof tiles.

As an elastic joint sealer for

• Air ducts and high vacuum systems.
• Containers, tanks, and silos
• Gaskets in openings in walls or floors for ducts, piling, etc.
• Aluminium fabrication
• Bolted lap joints
• Control Joints

Features

• Abrasion resistant including foot traffic
• Excellent application characteristics
• High Strength adhesive bond
• Excellent adhesion to a wide variety of substrates
• Permanently Flexible
• Non staining including Hydrophobic staining
• Damp surface tolerant
• Low dirt pick up
• High movement accommodation
• Excellent low temperature gun ability

Technical Information

Test Parameters	Results
Color	Grey, White, Other colour on request
Chemical base	Silyl Modified Polyurethane Technology
Appearance	Non-Sag Smooth Thixotropic paste
Cure System	Moisture Curing
Tack Free Time	> 30 minutes
Density (gm/cc)	1.35 ± 0.15
Cure Rate in mm/24hr	3.5mm / 24 hr
Shore A Hardness	40 ± 5
Tensile Strength	Approx.1.8 MPA
Service Temperature	-40º C to + 100º C
Application temperature	5º C to 40º C
Elongation at Break	Minimum 400 %
Movement Accommodation Factor ( MAF)	± 25%

 

Precautions & Limitations

• Maximum width for application in a joint is 30 mm.
• Sealant will not adhere to substrates with contamination and traces of bitumen.
• Adhesion of the sealant must only be on two opposite faces.
• Do not carry out sealing operations during hot weather conditions
• Product should be used within 24 hours of opening the sausage and should be closed properly after use.
• Do not apply at a temperature below 5°C.
•  The cured sealant can be painted over with water based paint, however owing different nature of these coatings,the compatibility should be tested before application. For alkyd paints a suitable water-based undercoat must be used

Buy DR. FIXIT Feviseal HY 300 Hybrid Sealant 600ml Pidilite