Dr. Fixit Bathseal W012 (4 ltrs) 

Dr. Fixit Bathseal Bathroom W012 (4 ltrs) Pidilite

Dr. Fixit Bathseal Select For Bathroom Waterproofing W012 (4 ltrs) Pidilite

 

Description

Dr. Fixit Bathseal Select is A Ready-To-Use; Liquid-Applied Elastomeric Water Based Waterproof Coating. That Cures To Form A Monolithic Membrane Designed For Wet Areas Under Tiled Finish Application. Being 1K Liquid Applied Coating, It Reduces Mixing Errors And Saves Time Due To Excellent Flow Properties And Thereby Easy Application With Roller Or Brush. It Is Fully Compatible With Polymer Modified Cement Based Tiles Adhesives, Screeds And Renders.

Technical compliances

• Complies With Technical Requirements Of Singapore Housing Development Board (HDB) For Toilets, Bathrooms And Other Wet Area Applications 
• Compliance To Australian Standard AS /NZS 4858 :2004 Class II Membrane “Waterproofing Of Wet Areas in Residential Buildings” 

Typical Application

Waterproof Coating For Internal Wet Areas As Under Tiled Finishes Concrete, Pre-Fabricated Bathrooms, Toilets And Drywall Partitions, Kitchens, Laundry Area. 

Features

• Ready To Use Straight From The Pail
• Flexible, Has Crack Bridging Ability
• High Bond Strength To A Variety Of Substrates And Building Materials
• Bonds To Clean Metal Drains, PVC, And ABS Drain Assemblies
• Liquid Applied Membrane, Can Be Applied With Roller, Brush
• Non-Toxic, Provides A Seamless Coating

Technical Information

PROPERTIES	TEST METHOD	RESULTS
Solid Content (w/w)	SS 5 Part B2	63 ± 2
Tensile Strength 14 days cure	ASTM D 412	≥ 1.5 N/ mm2
Elongation	ASTM D 412
7 days cure		≥ 250%
14 days cure		≥ 250%
Crack Bridging ability	EN 1062 -7	No cracks observed upto 3 mm width
Shore A Hardness	ASTM D 2240	≥ 55 (Shore A)

Set–to–touch	ASTM D 1640	60- 90 mins
Resistance to water penetration	DIN 1048	Passed no water penetration
Adhesion	ASTM D 4541
Concrete		≥ 1.5 N/mm2
Fiber board		≥ 1.4N/mm2
Plywood		≥ 2.0 N/mm2
Light weight block		≥ 1.0 N/mm2
Dry Wall (Gypsum)		≥ 0.50 N/mm2
Water Vapour Transmission	ASTM E 96	15-50 g/M2/day
Mendrasl Bend test (6 mm dia)	1800 around cylindrical mendral	passess
Chemical Resistance	ASNZ 4858 , 7 days immersion
	Dilute acids	Good
	Dilute Alkali	Good
	Salt Solution	Good
	Detergent Solution	Good
Water absorption	ASTMD 471	Complies

Precautions & Limitations

• Do not uses as wear surface, the Dr. Fixit Bathseal Select membrane must be covered with tile or other permanent flooring.
• For all under-tile applications use Roff Powerflex tile Adhesive or equivalent EN 12004:2017/C2 compliance, for Horizontal & Vertical application.
• Do not apply when temperatures are below 100C and above 350C
• The proper formation of the coating film can be affected if the coating is applied when the air temperature is below the specified temperature range (100C). Temperature variations can affect the (film formation) of a coating, causing color variations 
• Do not apply on existing concrete slabs on-ground with relative humidity levels over 85%. Contact Technical Services for other conditions for additional information.
• Pond test shall be carried out only after 5 days of air curing / drying of Dr. Fixit Bathseal Select with 25 mm water for 2 days.
• Avoid skin contact, use of gloves and safety glasses is recommended while using the product