Product Specification
| Product Name | 24V 3A Switching mode power supply | SSM2403 | SANSTAR |
| Brand | Sanstar |
| Product Code | CPK-0116 |
| Country of Manufacturer | IN |
| Weight | 1.000 |
| Category | Power Supply |
| System Type | CONVENTIONAL |
| Model | SSM24V03 |
Product Description
24V 3A Switching mode power supply | SSM2403 | SANSTAR - Strategic Industrial Guidance
24V 3A Switching mode power supply | SSM2403 | SANSTAR
FEATURES
• Latest state-of-the-art current mode PWM controller and MOSFET based design.
• Soft start circuit to limit the AC inrush current.
• Reliable even at high ambient temperature.
• 100% Full load burn-in test.
• LED indication for DC OK.
SPECIFICATIONS
| Inputi Characteristics |
Input voltage | 180-265VAC |
| Frequency | 45-60Hz | |
| Inrush current | <38A | |
| AC current consumption | 3A | |
| Input protection | 3A Subminiature fuse (Time-Lag type) | |
| Transient surge protection | Yes (varistor) | |
| Filter | EMI/RFI | |
| Buffer time |
>20msec at full load | |
| Efficiency | >80% | |
| Output Characteristics |
Nominal voltage | 24VDC |
| Voltage adj. range | 24-27VDC | |
| Nominal current | 03A | |
| Maximum output power | 81W | |
| Line regulation | < +/- 0.5% | |
| Load regulation | < +/- 0.5% | |
| Ripple and noise | < +/- 1% P-P | |
| Indications | DC OK- Green LED | |
| Connection in parallel | Yes, with diode ORing | |
| Over voltage protection | Yes, normally works within 28-33VDC | |
|
Over load protection |
Yes, normally works within 102-150% of rated nominal current |
|
| Short circuit protection | Yes | |
| Environmental Characteristics |
Ambient temperature (operation) | 0°C - 60°C |
| Ambient temperature (storage) | 0°C - 75°C | |
| Relative humidity | 95% at 25 °C, non condensation | |
| Cooling | Natural air convection | |
| Safety Characteristics |
Safety standard | IS 13252 (Part-1), IEC 60950-1 |
| Insulation voltage I/P-O/P | 3.0KVAC | |
| Insulation voltage I/P-PE | 1.5KVAC | |
| Insulation voltage O/P-PE | 500VAC | |
| Isolation resistance I/P-O/P | >100mega ohm @500DC min. | |
| Isolation resistance I/P-PE | >100mega ohm @500DC min. | |
| Isolation resistance O/P-PE | >100mega ohm @500DC min. | |
| General Characteristics |
Installation position | Panel mounting |
| Type of connection |
Screw type connec on (0.2 sq.mm-2.5 sq.mm) |
|
| Weight | 0.43 Kg | |
| Dimension (LXWXH) | 102 X 76 X 52 mm |
NOTE
1) All these parameters are specified at 230VAC@50Hz input voltage and ambient temperature +25°C
2 2) For continuous improvement, specifications are subject to change without prior intimation.
Returns & Cancellation
Returns Policy:
1. Once orders are placed, cancellations are not permitted.
2. Payments for orders will not be adjusted or refunded in case of cancellation.
Shipping & Delivery Policy:
1. 100 INR will be charged as shipping fee if buyer and seller are from same city. If buyer and seller are from different cities, the shipping charges will be on "To Pay Basis" or at actuals.
2. Shipping freight costs will be additional and based on actuals, to be borne by the buyer.
3. Additional shipping services such as courier or door delivery will incur extra charges, to be borne by buyer on extra at actuals basis.
4. Material will be shipped exclusively on a To-Pay basis for Godown Delivery only.
Feedback
You're reviewing: 24V 3A Switching mode power supply | SSM2403 | SANSTAR
Your Rating *
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.